R3303-HP HSR6800 Routers Security Command Reference

317
ip-address: Specifies the remote address for the IPsec tunnel.
Usage guidelines
This command applies to only manual IPsec policies.
If you execute this command multiple times, the most recent configuration takes effect.
An IPsec tunnel is established between the local and remote ends. The remote IP address of the local end
must be the same as that of the local IP address of the remote end.
Examples
# Set the remote address of the IPsec tunnel to 10.1.1.2.
<Sysname> system-view
[Sysname] ipsec policy policy1 10 manual
[Sysname-ipsec-policy-policy1-10] tunnel remote 10.1.1.2
Related commands
ipsec policy (system view)