R3303-HP HSR6800 Routers Security Command Reference

392
h323 1720 system defined
http 80 system defined
rtsp 554 system defined
smtp 25 system defined
ike 500 system defined
https 443 system defined
vam 18000 system defined
ssh 22 system defined
Table 59 Command output
Field Descri
p
tion
SERVICE Application layer protocol that is mapped to a port.
PORT Number of the port for the application layer protocol.
ACL Number of the ACL specifying the host range.
TYPE Port mapping type, system predefined or user customized.
Related commands
port-mapping
firewall aspf
Use firewall aspf to apply the specified ASPF policy to the specified direction of the current interface.
Use undo firewall aspf to remove the specified ASPF policy on the current interface.
Syntax
firewall aspf aspf-policy-number { inbound | outbound }
undo firewall aspf aspf-policy-number { inbound | outbound }
Default
No ASPF policy is applied on the interface.
Views
Interface view
Default command level
2: System level
Parameters
aspf-policy-number: Specifies the number of an ASPF policy, in the range of 1 to 99.
inbound: Applies ASPF policy to inbound packets.
outbound: Applies ASPF policy to outbound packets.
Examples
# Apply ASPF policy 1 to the outbound direction of GigabitEthernet 3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] firewall aspf 1 outbound