R3303-HP HSR6800 Routers Security Command Reference

395
ALG configuration commands
alg
Use alg to enable ALG for a protocol.
Use undo alg to disable ALG for a protocol.
Syntax
alg { all | dns | ftp | gtp | h323 | ils | msn | nbt | pptp | qq | rtsp | sccp | sip | sqlnet | tftp }
undo alg { all | dns | ftp | gtp | h323 | ils | msn | nbt | pptp | qq | rtsp | sccp | sip | sqlnet | tftp }
Default
The ALG feature is enabled for all protocols.
Views
System view
Default command level
2: System level
Parameters
all: Enables ALG for all protocols.
dns: Enables ALG for DNS.
ftp: Enables ALG for FTP.
gtp: Enables ALG for GTP.
h323: Enables ALG for H.323.
ils: Enables ALG for ILS.
msn: Enables ALG for MSN.
nbt: Enables ALG for NBT.
pptp: Enables ALG for PPTP.
qq: Enables ALG for QQ.
rtsp: Enables ALG for RTSP.
sccp: Enables ALG for SCCP.
sip: Enables ALG for SIP.
sqlnet: Enables ALG for SQLNET (a language in Oracle).
tftp: Enables ALG for TFTP.
Examples
# Enable ALG for FTP.
<Sysname> system-view
[Sysname] alg ftp