R3303-HP HSR6800 Routers Security Command Reference

400
Syntax
In standalone mode:
display session hardware slot slot-number [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display session hardware chassis chassis-number slot slot-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
slot slot-number: Specifies a card by its slot number. The slot-number argument represents the number of
the slot where the card resides. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies the ID of the IRF member device. The slot-number argument specifies the number of
the slot that holds the card. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is supported by only the FIP600 card.
Examples
# Display session count on the card in slot 3.
<Sysname> display session hardware slot 3
Current hardware session(s): 100
display session relation-table
Use display session relation-table to display relationship table entries.
Syntax
In standalone mode:
display session relation-table [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display session relation-table [ chassis chassis-number slot slot-number ] [ | { begin | exclude | include }
regular-expression ]