R3303-HP HSR6800 Routers Security Command Reference

405
If no slot number is specified, the command displays the sessions on all cards.
If multiple keywords are specified, the command displays the sessions that match all these criteria.
This command is not supported by the FIP600 card.
Examples
# Display brief information about all sessions.
<Sysname> display session table
Initiator:
Source IP/Port : 192.168.1.18/2048
Dest IP/Port : 192.168.1.55/768
Pro : ICMP(ICMP(1))
VPN-Instance/VLAN ID/VLL ID:
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port : 192.168.1.55/23
Pro : TCP(TCP(6))
VPN-Instance/VLAN ID/VLL ID:
Total find: 2
# Display detailed information about all sessions.
<Sysname> display session table verbose
Initiator:
Source IP/Port : 192.168.1.19/137
Dest IP/Port : 192.168.1.255/137
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.255/137
Dest IP/Port : 192.168.1.19/137
VPN-Instance/VLAN ID/VLL ID:
Pro: UDP(17) App: NBT-name State: UDP-OPEN
Start time: 2009-03-17 10:39:43 TTL: 2s
Root Zone(in): Management
Zone(out): Local
Received packet(s)(Init): 6 packet(s) 468 byte(s)
Received packet(s)(Reply): 0 packet(s) 0 byte(s)
Initiator:
Source IP/Port : 192.168.1.18/1212
Dest IP/Port : 192.168.1.55/23
VPN-Instance/VLAN ID/VLL ID:
Responder:
Source IP/Port : 192.168.1.55/23
Dest IP/Port : 192.168.1.18/1212
VPN-Instance/VLAN ID/VLL ID:
Pro: TCP(6) App: TELNET State: TCP-EST
Start time: 2009-03-17 09:30:33 TTL: 3600s
Root Zone(in): Management
Zone(out): Local
Received packet(s)(Init): 1173 packet(s) 47458 byte(s)
Received packet(s)(Reply): 1168 packet(s) 61845 byte(s)