R3303-HP HSR6800 Routers Security Command Reference

406
Total find: 2
Table 64 Command output
Field Descri
p
tion
Initiator: Session information of the initiator.
Responder: Session information of the responder.
Pro Transport layer protocol, TCP, UDP, ICMP, or Raw IP..
VPN-Instance/VLAN ID/VLL ID
MPLS L3VPN that the session belongs to and the VLAN
and INLINE that the session belongs to during Layer 2
forwarding.
App
Application layer protocol, FTP, DNS, MSN or QQ.
Unknown indicates protocol type of a non-well-known
port.
State
Session status. Possible values are:
• Accelerate.
• SYN.
• TCP-EST.
• FIN.
• UDP-OPEN.
• UDP-READY.
• ICMP-OPEN.
• ICMP-CLOSED.
• RAWIP-OPEN.
• RAWIP-READY.
Start Time Session establishment time.
TTL Remaining lifetime of the session, in seconds.
Zone(in) Security zone (in).
Zone(out) Security zone (out).
Received packet(s)(Init)
Counts of packets and bytes from the initiator to the
responder.
Received packet(s)(Reply)
Counts of packets and bytes from the responder to the
initiator.
Total find Total number of found sessions.
reset session
Use reset session to clear sessions.
Syntax
In standalone mode:
reset session [ slot slot-number ] [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol-type
{ icmp | raw-ip | tcp | udp } ] [ source-port source-port ] [ destination-port destination-port ]
[ vpn-instance vpn-instance-name ]