R3303-HP HSR6800 Routers Security Command Reference

408
reset session statistics [ chassis chassis-number slot slot-number ]
Views
User view
Default command level
2: System level
Parameters
slot slot-number: Specifies a card by its slot number. The slot-number argument specifies the slot where
the card resides. (In standalone mode)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies the ID of the IRF member device. The slot-number argument specifies the number of
the slot that holds the card. (In IRF mode)
Usage guidelines
If no slot number is specified, the command clears the session statistics on all cards.
Examples
# Clear all session statistics.
<Sysname> reset session statistics
session aging-time
Use session aging-time to set the aging timer for sessions of a specified protocol that are in a specified
state.
Use undo session aging-time to restore the default. If no keyword is specified, the command restores the
session aging timers for all protocol states to the defaults.
Syntax
session aging-time { accelerate | fin | icmp-closed | icmp-open | rawip-open | rawip-ready | syn |
tcp-est | udp-open | udp-ready } time-value
undo session aging-time [ accelerate | fin | icmp-closed | icmp-open | rawip-open | rawip-ready |
syn | tcp-est | udp-open | udp-ready ]
Default
The defaults vary with device models.
Views
System view
Default command level
2: System level
Parameters
accelerate: Specifies the aging timer for the sessions in the accelerate queue.
fin: Specifies the aging timer for the TCP sessions in the FIN_WAIT state.
icmp-closed: Specifies the aging timer for the ICMP sessions in the CLOSED state.
icmp-open: Specifies the aging timer for the ICMP sessions in the OPEN state.