R3303-HP HSR6800 Routers Security Command Reference

431
Default
The URL address filtering function is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the URL address filtering function.
<Sysname> system-view
[Sysname] firewall http url-filter host enable
Related commands
display firewall http url-filter host
firewall http url-filter host ip-address
Use firewall http url-filter host ip-address to enable/disable support for IP address in URL address
filtering, that is, to permit or deny web requests using IP addresses for access to websites.
Syntax
firewall http url-filter host ip-address { deny | permit }
Default
The URL address filtering function denies web requests using IP addresses for access to websites.
Views
System view
Default command level
2: System level
Parameters
deny: Specifies to deny a web request whose destination URL is present in IP address.
permit: Specifies to permit a web request whose destination URL is present in IP address.
Usage guidelines
This configuration takes effect only after the URL address filtering function is enabled.
Examples
# Configure to permit web requests using IP addresses for access to websites.
<Sysname> system-view
[Sysname] firewall http url-filter host ip-address permit
Related commands
• display firewall http url-filter host
• firewall http url-filter host enable