R3303-HP HSR6800 Routers Security Command Reference

36
undo self-service-url enable
Default
The self-service server location function is disabled.
Views
ISP domain view
Default command level
2: System level
Parameters
url-string: URL of the self-service server, a string of 1 to 64 characters that starts with http:// and contains
no question mark. This URL was specified by the RADIUS server administrator during RADIUS server
installation.
Usage guidelines
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by IMC support the self-service function.
Examples
# For ISP domain test, enable the self-service server location function, and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice
session-time include-idle-time
Use session-time include-idle-time to include the idle cut time in the user online time to be uploaded to
the server.
Use undo session-time include-idle-time to restore the default.
Syntax
session-time include-idle-time
undo session-time include-idle-time
Default
The user online time uploaded to the server excludes the idle cut time.
Views
ISP domain view
Default command level
2: System level
Usage guidelines
The device uploads to the server the online user time when a user is logged off. However, the online user
time of an abnormally logged-off user can contain an idle timeout interval or a detection interval when
the idle cut function or online portal user detection is enabled. You can configure the device to include or
exclude the idle cut time before the device uploads the online user time to the server according to your
accounting policy.