R3303-HP HSR6800 Routers Security Command Reference

37
Examples
# Configure the device to include the idle cut time in the user online time uploaded to the server for ISP
domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] session-time include-idle-time
Related commands
idle-cut enable
state (ISP domain view)
Use state to set the status of an ISP domain.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
An ISP domain is in active state.
Views
ISP domain view
Default command level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services. The
online users are not affected.
Examples
# Place the ISP domain test to the blocked state.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block