Manualshelf

R3303-HP HSR6800 Routers Security Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP HSR68xx Configure-to-Order Router Solution
511512513514515516517518519520
497
FIPS configuration commands
display fips status
Use display fips status to display the current FIPS mode state.
Syntax
display fips status
Views
Any view
Default command level
1: Monitor level
Examples
# Display the current FIPS mode state.
<Sysname> display fips status
FIPS mode is enabled
Related commands
fips mode enable
fips mode enable
Use fips mode enable to enable FIPS mode.
Use undo fips mode enable to disable FIPS mode.
Syntax
fips mode enable
undo fips mode enable
Default
The FIPS mode is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
The FIPS mode complies with FIPS 140-2.
After FIPS mode is enabled, delete the FIPS 140-2-incompliant local user service type Telnet, HTTP, or FTP
before you reboot the device.
To enter the FIPS mode, follow these steps: