R3303-HP HSR6800 Routers Security Command Reference

514
Related commands
• gdoi ks group
• redundancy enable
peer address
Use peer address to specify the IP address of a peer KS.
Use undo peer address to delete a peer KS IP address.
Syntax
peer address ip-address
undo peer address ip-address
Default
No IP address of a peer KS is specified.
Views
GDOI KS group view
Default command level
2: System level
Parameters
ip-address: Specifies the IP address of a peer KS.
Usage guidelines
You can specify multiple peer KS IP addresses by executing this command multiple times.
The peer IP address configuration takes effect only when KS redundancy is enabled with the redundancy
enable command.
In a GDOI KS redundancy scenario, the IP address of a peer KS specified on the local KS must be the
same as the source address that the peer KS uses to send redundancy protocol packets.
Examples
# Enable GDOI KS group redundancy, and specify 13 .1.1.1 as a peer KS address.
<Sysname> system-view
[Sysname]gdoi ks group abc
[Sysname-gdoi-ks-group-abc] redundancy enable
[Sysname-gdoi-ks-group-abc] peer address 13.1.1.1
[Sysname-gdoi-ks-group-abc]
Related commands
• gdoi ks group
• redundancy enable
• source address
profile (GDOI KS group IPsec policy view)
Use profile to specify the IPsec profile to be referenced by the GDOI KS group IPsec policy.