R3303-HP HSR6800 Routers Security Command Reference

538
Examples
# Configure a GDOI IPsec policy entry and enter its view. The IPsec policy name is map and the entry
sequence number is 1.
<Sysname> system-view
[Sysname] ipsec policy map 1 gdoi
# Reference GDOI GM group abc for the GDOI IPsec policy entry.
[Sysname-ipsec-policy-gdoi-map-1] group abc
Related commands
gdoi gm group
identity
Use identity to configure an ID for the GDOI GM group.
Use undo identity to delete the GDOI GM group ID.
Syntax
identity { address ip-address | number number }
undo identity
Default
No ID is configured for a GDOI GM group.
Views
GDOI GM group view
Default command level
2: System level
Parameters
address ip-address: Specifies any valid IPv4 address to identify the GDOI GM group.
number number: Specifies a number in the range of 0 to 2147483647 to identify the GDOI GM group.
Usage guidelines
You can configure only one type of ID (either an IP address or a number) for a GDOI GM group. If you
execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the ID of GDOI GM group abc to 1234 56 .
<Sysname> system-view
[Sysname] gdoi gm group abc
[Sysname-gdoi-gm-group-abc] identity number 123456
# Configure the ID of GDOI GM group def as 202.202.202.10.
<Sysname> system-view
[Sysname] gdoi gm group def
[Sysname-gdoi-gm-group-def] identity address 202.202.202.10
Related commands
display gdoi gm