R3303-HP HSR6800 Routers Security Command Reference

57
Total 1 RADIUS scheme(s).
Table 5 Command output
Field Descri
p
tion
SchemeName Name of the RADIUS scheme.
Index Index number of the RADIUS scheme.
Type
Type of the RADIUS server supported on the router:
• Extended—The RADIUS server uses the proprietary RADIUS protocol of
HP for packet exchange.
• Standard—The RADIUS server uses the standard RADIUS protocol for
packet exchange. The protocol is compliant to RFC 2865 and RFC 2866
or later.
Primary Auth Server Information about the primary authentication server.
Primary Acct Server Information about the primary accounting server.
Second Auth Server Information about the secondary authentication server.
Second Acct Server Information about the secondary accounting server.
IP IP address of the server.
Port
Service port of the server. If no port configuration is performed, the default
port number is displayed.
State Status of the server: active or blocked.
Encryption Key
Shared key for secure authentication or accounting communication,
displayed as a series of asterisks (******). If no shared key is configured, this
field displays N/A.
VPN instance
MPLS L3VPN to which the server belongs. If no VPN instance is specified for
the server, this field does not appear.
Probe username Username used for server status detection.
Probe interval Server status detection interval, in minutes.
Auth Server Encryption Key
Shared key for secure authentication communication, displayed as a series
of asterisks (******). If no shared key is configured, this field displays N/A.
Acct Server Encryption Key
Shared key for secure accounting communication, displayed as a series of
asterisks (******). If no shared key is configured, this field displays N/A.
VPN instance
MPLS L3VPN to which the scheme belongs. If no VPN instance is specified
for the scheme, this field displays N/A.
Accounting-On packet disable The accounting-on feature is disabled.
send times Retransmission times of accounting-on packets.
interval Interval at which the device retransmits accounting-on packets.
Interval for timeout(second) RADIUS server response timeout period, in seconds.
Retransmission times for timeout
Maximum number of attempts for transmitting a RADIUS packet to a single
RADIUS server.
Interval for realtime
accounting(minute)
Interval for real-time accounting, in minutes.
Retransmission times of
realtime-accounting packet
Maximum number of accounting attempts.