R3303-HP HSR6800 Routers Security Command Reference

63
Total 2 record(s) Matched
# Dsplay information about the stop-accounting requests buffered for user abc on slot 0 of IRF member
1. (In IRF mode.)
<Sysname> display stop-accounting-buffer user-name abc chassis 1 slot 0
Slot 0 in chassis 1:
RDIdx Session-ID user name Happened time
1 1000326232325010 abc 23:27:16-08/31/2006
1 1000326232326010 abc 23:33:01-08/31/2006
Total 2 record(s) Matched
Related commands
• reset stop-accounting-buffer
• stop-accounting-buffer enable
• user-name-format
• retry
• retry stop-accounting
key (RADIUS scheme view)
Use key to set the shared key for secure RADIUS authentication/authorization or accounting
communication.
Use undo key to remove the configuration.
Syntax
key { accounting | authentication } [ cipher | simple ] key
undo key { accounting | authentication }
Default
No shared key is configured.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
accounting: Sets the shared key for secure RADIUS accounting communication.
authentication: Sets the shared key for secure RADIUS authentication/authorization communication.
cipher: Sets a ciphertext shared key.
simple: Sets a plaintext shared key.
key: Specifies the shared key string. This argument is case sensitive. If simple is specified, it must be a
string of 1 to 64 characters. If cipher is specified, it must be a ciphertext string of 1 to 117 c h a rac t e r s. I f
neither cipher nor simple is specified, you set a plaintext shared key string. In FIPS mode, the shared key
must be a string of at least 8 characters that contain numbers, uppercase letters, lowercase letters, and
special characters.