R3303-HP HSR6800 Routers Security Command Reference

71
Default
No RADIUS scheme is defined.
Views
System view
Default command level
3: Manage level
Parameters
radius-scheme-name: RADIUS scheme name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
A RADIUS scheme referenced by ISP domains cannot be removed.
Examples
# Create a RADIUS scheme named radius1 and enter RADIUS scheme view.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1]
Related commands
display radius scheme
radius trap
Use radius trap to enable the trap function for RADIUS.
Use undo radius trap to disable the trap function for RADIUS.
Syntax
radius trap { accounting-server-down | authentication-error-threshold | authentication-server-down }
undo radius trap { accounting-server-down | authentication-error-threshold |
authentication-server-down }
Default
The trap function is disabled for RADIUS.
Views
System view
Default command level
2: System level
Parameters
accounting-server-down: Sends traps when the reachability of the accounting server changes.
authentication-error-threshold: Sends traps when the number of authentication failures exceed the
specified threshold. The threshold is represented by the ratio of the number of failed request transmission
attempts to the total number of transmission attempts. It ranges from 1 to 100 and defaults to 30. This
threshold can only be configured through the MIB.