R3303-HP HSR6800 Routers Security Command Reference

84
stop-accounting-buffer enable (RADIUS scheme view)
Use stop-accounting-buffer enable to enable the device to buffer stop-accounting requests to which no
responses are received.
Use undo stop-accounting-buffer enable to disable the buffering function.
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
Default
The device buffers stop-accounting requests to which no responses are received.
Views
RADIUS scheme view
Default command level
2: System level
Usage guidelines
Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every
stop-accounting request to the RADIUS accounting servers. For each stop-accounting request that
receives no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or the number of transmission attempts reaches the configured limit. In the latter case,
the NAS discards the packet. However, if you have removed the accounting server, stop-accounting
messages are not buffered.
Examples
# Enable the device to buffer the stop-accounting requests to which no responses are received.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
Related commands
• reset stop-accounting-buffer
• display stop-accounting-buffer
timer quiet (RADIUS scheme view)
Use timer quiet to set the quiet timer for servers.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet period is 5 minutes.