R3303-HP HSR6800 Routers Security Configuration Guide

142
Figure 50 Network diagram
Configuration prerequisites
Configure IP addresses for the host, router, and servers as shown in Figure 50 and make sure that they
can reach each other.
Configure the RADIUS server properly to provide authentication/authorization functions for users.
Configuring the portal server
This example assumes that the portal server runs on IMC PLAT 5.1 SP1 (E0202P05) and IMC UAM 5.1
(E0301).
1. Configure the portal server:
a. Log in to IMC and select the Service tab.
b. Select User Access Manager > Portal Service > Server from the navigation tree to enter the
portal server configuration page, as shown in Figure 51.
c. Conf
igure the portal server parameters as needed. This example uses the default settings.
d. Click OK.
Figure 51 Portal server configuration
2. Configure the IP address group:
RouterHost
2.2.2.2/24
Gateway : 2.2.2.1/24
GE3/0/2
2.2.2.1/24
GE3/0/1
192.168.0.100/24
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24