R3303-HP HSR6800 Routers Security Configuration Guide

144
Figure 53 Adding a portal device
4. Associate the portal device with the IP address group.
a. As shown in Figure 54, cl
ick the icon in the Port Group Information Management column of
device NAS to enter the port group configuration page.
Figure 54 Device list
b. On the port group configuration page, click Add to enter the page shown in Figure 55.
Perform the following configurations:
c. Enter the port group name.
d. Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address group.
e. Use the default settings for other parameters.
f. Click OK.
Figure 55 Adding a port group
5. Select User Access Manager > Service Parameters > Validate from the navigation tree to validate
the configurations.