R3303-HP HSR6800 Routers Security Configuration Guide

145
Configuring the router
1. Configure a RADIUS scheme:
# Create a RADIUS scheme named rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the IMC server, set the server type to
extended.
[Router-radius-rs1] server-type extended
# Specify the primary authentication/authorization server, and configure the keys for
communication with the servers.
[Router-radius-rs1] primary authentication 192.168.0.112
[Router-radius-rs1] key authentication radius
# Specify that the ISP domain name should not be included in the username sent to the RADIUS
server.
[Router-radius-rs1] user-name-format without-domain
[Router-radius-rs1] quit
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[Router] domain dm1
# Configure AAA methods for the ISP domain.
[Router-isp-dm1] authentication portal radius-scheme rs1
[Router-isp-dm1] authorization portal radius-scheme rs1
[Router-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication/authorization methods of the default domain
are used for the user.
[Router] domain default enable dm1
3. Configure portal authentication:
# Configure a portal server on the router, specifying the portal server name as newpt, IP address
as 192.168.0.111, key as plaintext string portal, port number as 50100, and URL as
http://192.168.0.111:8080/portal.
[Router] portal server newpt ip 192.168.0.111 key simple portal port 50100 url
http://192.168.0.111:8080/portal
# Enable portal authentication on the interface connecting the host.
[Router] interface gigabitethernet 3/0/2
[Router–GigabitEthernet3/0/2] portal server newpt method direct
[Router–GigabitEthernet3/0/2] quit
Verifying the configuration
Execute the following command to see whether the portal configuration has taken effect:
[Router] display portal interface gigabitethernet 3/0/2
Portal configuration of GigabitEthernet3/0/2
IPv4:
Status: Portal running
Portal server: newpt
Authentication type: Direct