R3303-HP HSR6800 Routers Security Configuration Guide

162
# Specify the primary authentication/authorization server, and configure the keys for
communication with the servers.
[RouterA-radius-rs1] primary authentication 192.168.0.111
[RouterA-radius-rs1] key authentication simple radius
# Configure the device to not carry the ISP domain name in the username sent to the RADIUS
server.
[RouterA-radius-rs1] user-name-format without-domain
# Specify the source IP address for RADIUS packets to be sent as 3.3.0.3. This address must be the
same as that of the access device specified on the server.
[RouterA-radius-rs1] nas-ip 3.3.0.3
[RouterA-radius-rs1] quit
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[RouterA] domain dm1
# Configure AAA methods for the ISP domain.
[RouterA-isp-dm1] authentication portal radius-scheme rs1
[RouterA-isp-dm1] authorization portal radius-scheme rs1
[RouterA-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication/authorization methods of the default domain
are used for the user.
[RouterA] domain default enable dm1
3. Configure portal authentication:
# Configure the portal server as follows:
{ Name: newpt
{ IP address: 192.168.0.111
{ VPN: vpn3
{ Key: portal, in plain text
{ Port number: 50100
{ U R L : h t t p : / / 19 2.16 8 . 0 .111:8080/portal
[RouterA] portal server newpt ip 192.168.0.111 vpn-instance vpn3 key simple portal
port 50100 url http://192.168.0.111:8080/portal
# Enable Layer 3 portal authentication on the interface connecting the user side.
[RouterA] interface gigabitethernet 3/0/1
[RouterA–GigabitEthernet3/0/1] portal server newpt method layer3
[RouterA–GigabitEthernet3/0/1] quit
Verifying the configuration
Execute the display portal server command to check whether the portal configuration has taken effect.
After Host passes portal authentication, perform the display portal user command to view information
about online portal users on Router A.
[RouterA] display portal user all
Index:2
State:ONLINE
SubState:NONE
ACL:NONE