R3303-HP HSR6800 Routers Security Configuration Guide

278
IPsec policy name: "btoa"
sequence number: 1
acl version: ACL4
mode: tunnel
-----------------------------
PFS: N, DH group: none
tunnel:
local address: 1.1.1.1
remote address: 1.1.1.2
flow :
sour addr: 0.0.0.0/0.0.0.0 port: 0 protocol: IP
dest addr: 0.0.0.0/0.0.0.0 port: 0 protocol: IP
[inbound ESP SAs]
spi: 0x75b6ef44 (1974923076)
transform: ESP-ENCRYPT-DES ESP-AUTH-MD5
in use setting: Tunnel
connection id: 15
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
anti-replay detection: Enabled
anti-replay window size(counter based): 32
udp encapsulation used for nat traversal: N
[outbound ESP SAs]
spi: 0x8cf16c54(2364632148)
transform: ESP-ENCRYPT-DES ESP-AUTH-MD5
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
anti-replay detection: Enabled
anti-replay window size(counter based) : 32
udp encapsulation used for nat traversal: N
# On Router B, ping the IP address of the interface on Router A that connects to the branch.
[RouterB] ping -a 192.168.1.1 172.17.17.1
PING 172.17.17.1: 56 data bytes, press CTRL_C to break
Reply from 172.17.17.1: bytes=56 Sequence=1 ttl=255 time=15 ms
Reply from 172.17.17.1: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=4 ttl=255 time=5 ms
Reply from 172.17.17.1: bytes=56 Sequence=5 ttl=255 time=4 ms
--- 172.17.17.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/8/15 ms
Similarly, you can view the information on Router A. (Details not shown.)