R3303-HP HSR6800 Routers Security Configuration Guide

285
# Apply IPsec policy use1 to interface GigabitEthernet 3/0/1.
[RouterB] interface gigabitethernet 3/0/1
[RouterB-GigabitEthernet3/0/1] ipsec policy use1
4. Verify the configuration:
# Send traffic from subnet 10.5.5.0/24 to subnet 10.4.4.0/24, or from subnet 10.4.4.0/24 to
10.5.5.0/24. IKE negotiation is triggered to establish IPsec SAs between Router A and Router B.
# Display the routing table on Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Destinations : 8 Routes : 8
Destination/Mask Proto Pre Cost NextHop Interface
1.1.0.0/16 Direct 0 0 1.1.1.1 GE3/0/1
1.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0
2.2.2.0/24 Static 60 0 1.1.1.2 GE3/0/1
10.4.4.0/24 Direct 0 0 10.4.4.1 GE3/0/2
10.4.4.4/32 Direct 0 0 127.0.0.1 InLoop0
10.5.5.0/24 Static 60 0 1.1.1.2 GE3/0/1
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
The output shows that IPsec RRI has created a static route to subnet 10.5.5.0/24 with the next hop
1.1.1.2.
# Delete the IPsec SAs.
The static route is automatically deleted.