R3303-HP HSR6800 Routers Security Configuration Guide
18
No. Attribute Descri
p
tion
40 Acct-Status-Type
Type of the Accounting-Request packet. Possible values include:
• 1—Start.
• 2—Stop.
• 3—Interim-Update.
• 4—Reset-Charge.
• 7—Accounting-On. (Defined in the 3rd Generation Partnership Project.)
• 8—Accounting-Off. (Defined in the 3rd Generation Partnership Project.)
• 9 to 14—Reserved for tunnel accounting.
• 15—Reserved for failed.
45 Acct-Authentic
Authentication method used by the user. Possible values include:
• 1—RADIUS.
• 2—Local.
• 3—Remote.
60 CHAP-Challenge
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.
61 NAS-Port-Type
Type of the physical port of the NAS that is authenticating the user. Possible
values include:
• 15—Ethernet.
• 16—Any type of ADSL.
• 17—Cable (with cable for cable TV).
• 19—WLAN-IEEE 802.11.
• 201—VLAN.
• 202—ATM.
If the port is an ATM or Ethernet one and VLANs are implemented on it, the
value of this attribute is 201.
79 EAP-Message
Used to encapsulate EAP packets to allow RADIUS to support EAP
authentication.
80 Message-Authenticator
Used for authentication and verification of authentication packets to prevent
spoofing Access-Requests. This attribute is present when EAP authentication is
used.
87 NAS-Port-Id String for describing the port of the NAS that is authenticating the user.
HP proprietary RADIUS sub-attributes
No. Sub-attribute Descri
p
tion
1 Input-Peak-Rate Peak rate in the direction from the user to the NAS, in bps.
2 Input-Average-Rate Average rate in the direction from the user to the NAS, in bps.
3 Input-Basic-Rate Basic rate in the direction from the user to the NAS, in bps.
4 Output-Peak-Rate Peak rate in the direction from the NAS to the user, in bps.
5 Output-Average-Rate Average rate in the direction from the NAS to the user, in bps.
6 Output-Basic-Rate Basic rate in the direction from the NAS to the user, in bps.