R3303-HP HSR6800 Routers Security Configuration Guide

19
No. Sub-attribute Descri
p
tion
15 Remanent_Volume
Total remaining available traffic for the connection, in different units for
different server types.
20 Command
Operation for the session, used for session control. Possible values
include:
• 1—Trigger-Request.
• 2—Terminate-Request.
• 3—SetPolicy.
• 4—Result.
• 5—PortalClear.
24 Control_Identifier
Identification for retransmitted packets. For retransmitted packets of the
same session, this attribute must take the same value. For retransmitted
packets of different sessions, this attribute may take the same value. The
client response of a retransmitted packet must also carry this attribute and
the value of this attribute must be the same.
For Accounting-Request packets of the start, stop, and interim update
types, the Control-Identifier attribute does not take effect.
25 Result_Code
Result of the Trigger-Request or SetPolicy operation, zero for success and
any other value for failure.
26 Connect_ID Index of the user connection.
28 Ftp_Directory
FTP user working directory. When the RADIUS client acts as the FTP server,
this attribute is used to set the FTP directory for an FTP user on the RADIUS
client.
29 Exec_Privilege EXEC user priority.
59 NAS_Startup_Timestamp
Startup time of the NAS in seconds, which is represented by the time
elapsed after 00:00:00 on Jan. 1, 1970 (UTC).
60 Ip_Host_Addr
User IP address and MAC address carried in authentication and
accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A space is
required between the IP address and the MAC address.
61 User_Notify Information that must be sent from the server to the client transparently.
62 User_HeartBeat
Hash value assigned after an 802.1X user passes authentication, which is
a 32-byte string. This attribute is stored in the user list on the NAS and is
used for verifying the handshake messages from the 802.1X user. This
attribute only exists in Access-Accept and Accounting-Request packets.
140 User_Group
User groups assigned after the SSL VPN user passes authentication. A user
may belong to more than one user group. In this case, the user groups are
delimited by semi-colons. This attribute is used for cooperation with the SSL
VPN device.
141 Security_Level
Security level assigned after the SSL VPN user passes security
authentication.
201 Input-Interval-Octets Number of bytes input within a real-time accounting interval.
202 Output-Interval-Octets Number of bytes output within a real-time accounting interval.
203 Input-Interval-Packets
Number of packets input within an accounting interval, in the unit set on
the NAS.
204 Output-Interval-Packets
Number of packets output within an accounting interval, in the unit set on
the NAS.