R3303-HP HSR6800 Routers Security Configuration Guide

328
[Router] ssh user client002 service-type stelnet authentication-type publickey assign
publickey ClientKey
3. Establish a connection to the Stelnet server:
a. Launch PuTTY.exe on the Stelnet client to enter the following interface.
b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server.
Figure 106 Specifying the host name (or IP address)
c. Select Connection > SSH > Auth from the navigation tree.
d. Click Browse… to bring up the file selection window, navigate to the private key file
(private.ppk) and click OK.