R3303-HP HSR6800 Routers Security Configuration Guide

Configuration procedure

# Configure ARP filtering on Router B.

<RouterB> system-view

[RouterB] interface gigabitethernet 3/0/1

[RouterB-GigabitEthernet3/0/1] port link-mode bridge

[RouterB-GigabitEthernet3/0/1] arp filter binding 10.1.1.2 000f-e349-1233

[RouterB-GigabitEthernet3/0/1] quit

[RouterB] interface gigabitethernet 3/0/2

[RouterB-GigabitEthernet3/0/2] port link-mode bridge

[RouterB-GigabitEthernet3/0/2] arp filter binding 10.1.1.3 000f-e349-1234

After the configuration is complete, GigabitEthernet 3/0/1 permits ARP packets from Host A, and

discard other ARP packets. GigabitEthernet 3/0/2 permits ARP packets from Host B and discard other

ARP packets.