R3303-HP HSR6800 Routers Security Configuration Guide

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait....

The current configuration is saved to the active main board successfully.

Configuration is saved to device successfully.

[Sysname] quit

# Reboot the device.

<Sysname> reboot

Verifying the configuration

After the device reboots, enter the username (test) and password (AAbbcc1234%). The system prompts

that your first login is successful, and asks you to enter a new password. Enter a new password which has

at least four characters different than the previous one and confirm the password. Then, the system

displays the <Sysname> prompt.

User interface con0 is available.

Please press ENTER.

Username:test

Password:

Info: First logged in. For security reasons you will need to change your password.

Please enter your new password.

Password:**********

Confirm :**********

Updating user(s) information, please wait...........

# Display the current FIPS mode.

<Sysname> display fips status

FIPS mode is enabled