R3303-HP HSR6800 Routers Security Configuration Guide

38
Task Command Remarks
Display information about buffered
stop-accounting requests for which no
responses have been received (in IRF
mode).
display stop-accounting-buffer { radius-scheme
radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name
user-name } [ chassis chassis-number slot
slot-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Clear RADIUS statistics (in standalone
mode).
reset radius statistics [ slot slot-number ]
Available in user
view.
Clear RADIUS statistics (in IRF mode).
reset radius statistics [ chassis chassis-number
slot slot-number ]
Available in user
view.
Clear the buffered stop-accounting
requests for which no responses have
been received (in standalone mode).
reset stop-accounting-buffer { radius-scheme
radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name
user-name } [ slot slot-number ]
Available in user
view.
Clear the buffered stop-accounting
requests for which no responses have
been received (in IRF mode).
reset stop-accounting-buffer { radius-scheme
radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name
user-name } [ chassis chassis-number slot
slot-number ]
Available in user
view.
Configuring HWTACACS schemes
You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.
HWTACACS configuration task list
Task Remarks
Creating an HWTACACS scheme Required.
Specifying the HWTACACS authentication servers Required.
Specifying the HWTACACS authorization servers Optional.
Specifying the HWTACACS accounting servers and the relevant parameters Optional.
Specifying the shared keys for secure HWTACACS communication Required.
Specifying a VPN for the HWTACACS scheme Optional.
Setting the username format and traffic statistics units Optional.
Specifying the source IP address for outgoing HWTACACS packets Optional.
Setting HWTACACS timers Optional.
Displaying and maintaining HWTACACS Optional.
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before you perform other HWTACACS
configurations, create an HWTACACS scheme and enter HWTACACS scheme view. You can configure
up to 16 HWTACACS schemes.