R3303-HP HSR6800 Routers Security Configuration Guide

39
To create an HWTACACS scheme and enter HWTACACS scheme view:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an HWTACACS scheme and
enter HWTACACS scheme view.
hwtacacs scheme
hwtacacs-scheme-name
Not defined by default.
You can delete an HWTACACS scheme only when it is not referenced.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and one secondary authentication server for an
HWTACACS scheme. When the primary server is not available, the secondary server is used. In a
scenario where redundancy is not required, specify only the primary server.
An HWTACACS server can function as the primary authentication server of one scheme and as the
secondary authentication server of another scheme at the same time. You cannot specify the same IP
address as both the primary and the secondary authentication servers in a scheme.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter HWTACACS scheme
view.
hwtacacs scheme
hwtacacs-scheme-name
N/A
3. Specify HWTACACS
authentication servers.
• Specify the primary HWTACACS
authentication server:
primary authentication ip-address
[ port-number | vpn-instance
vpn-instance-name ] *
• Specify the secondary
HWTACACS authentication
server:
secondary authentication
ip-address [ port-number |
vpn-instance vpn-instance-name ]
*
Configure at least one command.
No authentication server is
specified by default.
You can remove an authentication server only when no active TCP connection for sending authentication
packets is using it.
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and one secondary authorization server for an
HWTACACS scheme. When the primary server is not available, the secondary server is used. In a
scenario where redundancy is not required, specify only the primary server.
An HWTACACS server can function as the primary authorization server of one scheme and as the
secondary authorization server of another scheme at the same time. You cannot specify the same IP
address as both the primary and the secondary authorization servers in a scheme.
To specify HWTACACS authorization servers for an HWTACACS scheme: