R3303-HP HSR6800 Routers Security Configuration Guide

52
Ste
p
Command Remarks
4. Specify the default accounting
method for all types of users.
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is local for all types of users.
5. Specify the command
accounting method.
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
Optional.
The default accounting method
is used by default.
6. Specify the accounting
method for DVPN users.
accounting dvpn { local | none |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default accounting method
is used by default.
7. Specify the accounting
method for LAN users.
accounting lan-access { local | none |
radius-scheme radius-scheme-name
[ local | none ] }
Optional.
The default accounting method
is used by default.
This command is supported
only on SAP interface modules
that are operating in Layer 2
mode.
Accounting statistics is
collected per port for 802.1X.
8. Specify the accounting
method for login users.
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.
9. Specify the accounting
method for portal users.
accounting portal { local | none |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default accounting method
is used by default.
10. Specify the accounting
method for PPP users.
accounting ppp { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.
Tearing down user connections
Ste
p
Command Remarks
1. Enter system view.
system-view N/A