R3303-HP HSR6800 Routers Security Configuration Guide

Figure 12 Adding an account for device management

Configuring the router

# Assign an IP address to interface GigabitEthernet 3/0/1, the Telnet user access interface.

<Router> system-view

[Router] interface gigabitethernet 3/0/1

[Router-GigabitEthernet3/0/1] ip address 192.168.1.70 255.255.255.0

[Router-GigabitEthernet3/0/1] quit

# Configure the IP address of interface GigabitEthernet 3/0/2, through which the router communicates

with the server.

[Router] interface gigabitethernet 3/0/2

[Router-GigabitEthernet3/0/2] ip address 10.1.1.2 255.255.255.0

[Router-GigabitEthernet3/0/2] quit

# Enable the Telnet server on the router.

[Router] telnet server enable

# Configure the router to use AAA for Telnet users.

[Router] user-interface vty 0 4

[Router-ui-vty0-4] authentication-mode scheme

[Router-ui-vty0-4] quit

# Create RADIUS scheme rad.

[Router] radius scheme rad

# Specify the primary authentication server.

[Router-radius-rad] primary authentication 10.1.1.1 1812