R3303-HP HSR6800 Routers Security Configuration Guide

67
Figure 22 Portal server configuration
2. Configure an IP address group:
a. Select User Access Manager > Portal Service > IP Group from the navigation tree.
b. Click Add to configure an IP address group as follows:
Enter the name Portal_user.
Set the start IP address to 192.168.1.1 and the end IP address to 192.168.1.255. Make sure
the IP address group contains the IP address of the host.
Select the action Normal.
c. Click OK.
Figure 23 Adding an IP address group
3. Configure the router as a portal device:
a. Select User Access Manager > Portal Service > Device from the navigation tree.
b. Click Add to configure a portal device as follows:
Enter the device name NAS.