R3303-HP HSR6800 Routers Security Configuration Guide

68
Enter the IP address of the access interface on the router, which is 192.168.1.70.
Enter the key, which is portal, the same as that configured on the router.
Specify whether to enable IP address reallocation. This example uses direct portal
authentication by selecting No from the Reallocate IP list.
c. Leave the default settings for other parameters and click OK.
Figure 24 Adding a portal device
4. Associate the portal device with the IP address group:
a. In the portal device list, click the icon in the Port Group column for NAS.
b. Click Add to configure a port group for the portal device as follows:
Enter the port group name.
Select an IP address group you just configured from the IP Group list.
c. Leave the default settings for other parameters and click OK.
Figure 25 Device list