Ibrix v2.2 and v3.1 Offline Upgrade Procedure

7. Execute the following command to verify that the Segment Server is
operational:
/etc/init.d/ibrix_server status
Iad is running.. pid 2808
The IAD service should be running, as shown in the output. If it is not, contact
IBRIX Customer Support.
8. Execute the following commands to verify that the ibrix and ipfs services are
running. If either grep returns empty, contact IBRIX Customer Support.
lsmod|grep ibrix
ibrix 2323332 0 (unused)
lsmod|grep ipfs
ipfs1 102592 0 (unused)
9. On each client run the upgrade script from the ibrix directory:
./ibrixupgrade
10. Execute the following command to verify Ibrix is running:
/etc/init.d/ibrix_client status
Iad is running.. pid 13023.
11. When all looks good turn HA back on from the FM:
Ibrix_host –m
IBRIX_S00000046.pdf
Last modified: 8/6/2008