6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

Review the information on the Configuration Summary. If the information is correct, select
Accept.
The wizard now configures the blade.
7. The network layout configured on the blade must match the layout used by the X9720or X9320
system. By default, the installation creates a single, unified network for all cluster and user
traffic. However, if the existing cluster uses separate user and cluster networks, you need to
configure those networks on this blade.
• If the existing cluster uses a single network, go to step 8 for information about the
Confirming Onboard Administrator and Virtual Connect Settings dialog box.
• If the existing cluster uses a different network layout, do not make any entries on the
Confirming Onboard Administrator and Virtual Connect Settings dialog box. Instead,
press F2 to configure a compatible network layout on this blade.
114 Expanding an X9720 or X9320 10GbE cluster by an X9730 module