6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

sets the iLO IP addresses in the range 172.16.3.1 to 172.16.3.16 by incrementing 1 to the
last octet of the IP address.
To configure the iLO IP addresses manually, enter each iLO IP address on the Enter iLO IP
Addresses dialog box.
12. The wizard lists the IP addresses you specified on the Confirm iLO IP Addresses dialog box.
Select Ok to continue.
13. Configure the chassis interconnect bays (VCs and SAS switches). On the Get Interconnect IP
Addresses dialog box, specify whether you want to configure the Interconnect (IC) IP addresses
in sequence or manually. Use the space bar to select/deselect the check boxes.
Installing the first expansion blade 117