6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

28. The Configuration Summary dialog box lists the configuration of the blade. If the information
is correct, select Commit.
29. The blade is now registered with the active management console and a passive management
console is installed and registered on the blade.
Installing the second expansion blade
The installation procedure is similar to the first node, except the firmware, chassis, SAS, and storage
checks are already in place.
1. Log into the second expansion node (slot 4 in our example).
2. Log into the blade in the first expansion slot. The X9730 Setup dialog box is displayed.
3. The setup wizard verifies the firmware on the system and notifies you if a firmware update is
needed. See “Firmware updates” (page 72) for more information.
Installing the second expansion blade 123