6.1 HP IBRIX X9000 Network Storage System Installation Guide (TA768-96058, June 2012)

To configure the Interconnect (IC) IP addresses in sequence, enter the first Interconnect (IC) IP
address on the Set Interconnect IP Addresses dialog box. The installer then sets the remainder
of the addresses sequentially for all 8 interconnect bays. For example, if 172.16.3.21 is the
starting Interconnect (IC) IP Address, the installer sets the Interconnect (IC) IP Addresses in the
range 172.16.3.21–172.16.3.28.
To configure the Interconnect IP addresses manually, enter each address on the Set Interconnect
IP Addresses dialog box.
13. The wizard lists the IP addresses you specified on the Confirm IC IP Addresses dialog box.
Select Ok to continue.
Starting the installation and configuring the chassis 55