Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

Change Boot Order
Manage BootNext setting
Set Auto Boot TimeOut
Select Active Console Output Devices
Select Active Console Input Devices
Select Active Standard Error Devices
Cold Reset
Exit
3. Select Add a Boot Option.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Add a Boot Option. Select a Volume
Removable Media Boot[Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)]
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E1E3ED6)]
Exit
4. Select the appropriate network interface so that this network boot loads the appropriate file.
For example, look for entries identified with a MAC address as in this example.
Device Path Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)
Boot0001: Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4A134B)
Edit Existing Boot Option or make a new entry [E-Edit N-New]:
5. Press N to add the new boot option.
6. Enter a brief, descriptive boot option name at the message prompt. In this example, the new
boot option is named LAN1.
Enter New Description:
7. Enter a brief description for this boot option.
New BootOption Data. ASCII/Unicode strings only, with max of 240 characters
Enter BootOption Data Type [A-Ascii U-Unicode N-No BootOption] :
8. Enter the data type of this boot option.
Save changes to NVRAM [Y-Yes N-No]:
9. Press Y to save the new boot option.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Add a Boot Option. Select a Volume
LAN1 [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
Removable Media Boot[Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)]
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E1E3ED6)]
Load File [PcieRoot(0x30304352)/Pci(0x7,0x0)/Pci(0x0,0x0)/Fibre(0x500110A0008F063A, 0x0)]
Exit
NOTE: The boot option name, description, and data type information can be modified using
the Edit operation in a manner similar to the New operation as described in this procedure.
10. Exit to the EFI Boot Manager menu taking care not to select a boot option, as you will be
forced to reenter the information for the selected option.
The new boot option should appear in the EFI Boot Manager main menu.
EFI Boot Manager ver 1.10 [14.60]
Please select a boot option
Booting Itanium-Based Clients using the Network 101