Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

Figure 38 NETWORK CONFIGURATION with no DHCP
If a DHCP server is found, the NETWORK CONFIGURATION screen will contain the client's
hostname and IP address. If there is networking configuration information on the server, the
parameters regarding contacting the server will be filled-in as well.
Set the NETWORK CONFIGURATION parameters so the client system can contact the Ignite-UX
server. When the parameters are set, select OK.
The server will then be contacted for its installation configuration information for the client. (A
dialog box will be displayed on the server with information that this client was found.) The client
configuration information is then displayed in the terminal user interface (TUI) version of the client
installation configuration interface (itool).
NOTE: The NETWORK CONFIGURATION screen has input fields. Typing a shortcut key, such
as O for OK, while the cursor is positioned at an input field will result in an O being entered in the
field instead of selecting the OK button.
Figure 39 The TUI Version of itool
Installing HP-UX From the Client Console 107