Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

The selection in the View By: pulldown controls the display in the View window. The selection in
the View window controls the display in the Path/Location window. Available selections in the
View By: pulldown are:
• Adaptor
Displays the available Host Bus Adaptors (HBAs) in the View window. The Path/Location
window displays all the paths to all disks attached to the HBA currently selected in the View
window.
• Disks/Paths
Displays one path for each disk/LUN in the View window. The Path/Location window displays
all the paths to the disk currently selected in the View window.
• I/O Protocol
Displays the available protocols in the View window. The Path/Location window displays all
the paths to all disks of the protocol type currently selected in the View window.
• Size
Displays the available disk sizes in the View window. The Path/Location window displays all
the paths to all the disks of the size currently selected in the View window.
• Usage
The Path/Location window displays all paths to all disks matching the criterion selected in the
View window. Those criteria are:
◦ All
◦ Disks NOT to be written to in this Ignite session
◦ Disks TO be written to in this Ignite session
◦ Disks with preexisting data
◦ Blank disks and disks with unrecognized data
The Filter text box will limit what's displayed in the windows by only displaying results with the
filter text in them. Enter the filter text and then select Apply. To undo the filter, select Clear. The
filter acts on the Path/Location window for all Views except Disks/Paths, where it acts on the View
window.
The Path/Location window displays a great deal of information, but you have to scroll horizontally
to see all the fields. The fields displayed in the Path/Location window are: Path/Location, Usage,
Group, Size, Model, WWID, Existing (preexisting data), Legacy Path, and Device ID. The Filter is
able to screen all these fields.
The Disk Selection – Root Disk dialog box displays every path for each disk, therefore disks with
multiple paths are listed multiple times. To get a concise listing of all the paths for a single device,
use the Disks/Paths view or click the More Info button. Note that devices blocked from Ignite-UX
start-up inventory will not be listed.
In addition to listing all the paths for a particular device, the More Info button provides detailed
information, such as Device ID, and WWID.
120 Booting and Installing HP-UX on Clients Using the Server