Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

IMPORTANT: Installing individual bundles instead of the complete product might cause problems
for Ignite-UX if the complete product was installed previously. Refer to the Installing and Updating
Ignite-UX white paper if you are unsure of what to install to upgrade Ignite-UX. Links to the Ignite-UX
white papers are found at http://www.hp.com/go/ignite-ux-docs.
Ignite-UX Commands and Manpages
The manual pages (manpages) associated with Ignite-UX commands are in the /opt/ignite/
share/doc/ directory, are available in the HP-UX Reference at http://www.hp.com/go/
ignite-ux-docs, and are listed in Table 2 according to the directory the commands are in.
Table 2 Ignite-UX Command Manpages
DescriptionIgnite-UX Command Manpages
Commands in /opt/ignite/bin :
Add a client to an Ignite-UX server without requiring a client boot from
the Ignite-UX server.
add_new_client(1M)
Manage logical interchange format (LIF) AUTO configuration files.auto_adm(1M)
auto_adm(4)
Description of auto_adm file formats
Reboot and install systems using Ignite-UX.bootsys(1M)
Compare the files on a running system with a recovery archive made
with make_net_recovery.
check_net_recovery(1M)
Compare the files on a running system with a recovery archive made
with make_tape_recovery.
check_tape_recovery(1M)
Replicate a PA-RISC boot tape.copy_boot_tape(1M)
Configure, install, and recover HP-UX systems.ignite(5)
Manage Ignite-UX configuration files.instl_adm(1M)
Description of configuration file syntax.instl_adm(4)
Parse and debug a client's configuration files.instl_dbg(1M)
Create a boot tape for a PA-RISC system.make_boot_tape(1M)
Create Software Distributor (SD) bundles in a depot.make_bundles(1M)
Generate a configuration file for software in an SD depot.make_config(1M)
Create SD depots from SD bundles for use by Ignite-UX.make_depots(1M)
Create a bootable ANSI labeled tape for Itanium-based systems.make_ipf_tape(1M)
Create bootable Ignite-UX LIFmedia image file.make_medialif(1M)
Create recovery images and store them on a network system.make_net_recovery(1M)
Create recovery images and store them on tape.make_tape_recovery(1M)
Manage Ignite-UX INDEX files without directly editing them.manage_index(1M)
Print a system manifest.print_manifest(1M)
Create hardware configuration file.save_config(1M)
Commands in /opt/ignite/lbin:
Read and write magnetic tapes conforming to the ANSI standard for
magnetic tape labelling.
ansitape(1M)
ansitape(5)
Description of ANSI-labeled tape format.
Ignite-UX Commands and Manpages 13