Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

Figure 80 File System Tab
IMPORTANT: The information appearing on this tab is tailored to the operating system release
and hardware architecture. HP recommends that extreme care be exercised when altering these
values.
Adding or Changing a File System Configuration
Adding a new file system or changing an existing one are similar actions in that the same
information is needed for both.
IMPORTANT: Renaming or changing the disk file system structure causes the old file system on
that disk to be lost.
To add or change any of the file system configurations, use the following steps:
1. Select a file system from the list. To view all of the available information for the file system,
you can use the horizontal and vertical scroll bars, or resize the dialog box.
2. Enter or change information using the following buttons or fields, and then click Add or Modify.
You will lose your changes if you move to another tab without clicking Add or Modify.
Usage: Click the selection list button adjacent to Usage: to choose from the list of
file system usage types. The available choices are HFS, VxFS, SWAP, Unused,
DUMP, and SWAP+DUMP. In general, HP recommends the use of VxFS.
Group: Click the selection list button adjacent to Group: to select the appropriate
volume group name for the selected file system.
To add a new/unused disk and give it a different volume group name or
create a new volume group, use the Add/Remove Disks... button.
If you want to reconfigure the volume group in general, including renaming
it, click Additional Tasks and then select Group Parameters to supply a custom
group name and to change other disk parameters.
138 Booting and Installing HP-UX on Clients Using the Server