Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

Figure 87 Repeat Install Dialog Box
The Configuration File list (Figure 87) is populated by the last installation configuration, and all
those that you have created using the Save As...button that is on all of the installation configuration
tabs. These saved installation configurations are stored in /var/opt/ignite/saved_cfgs/.
If there are no saved configurations, the Repeat Install action is not available and you must begin
a new installation as described in “New Installation” (page 116).
Select one of the configurations listed by clicking on it, then click OK. Ignite-UX begins the installation
process with a confirmation query to alert you that the clients appearing in the Selected Clients list
are about be installed. Confirm or cancel the installation of the listed clients using the appropriate
button.
Executing the Installation
After selecting Go! to initiate a new installation, and also after confirming a repeat installation,
Ignite-UX executes a preinstallation consistency check to identify any errors that must be corrected
before the installation occurs (Figure 88).
146 Booting and Installing HP-UX on Clients Using the Server