Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

3. At the client, from the main menu, select Install HP-UX.
a. Respond to the Network Configuration dialog box.
b. Respond to the UI Display Options dialog box (run at the Ignite-UX server or at a client.)
c. If working from the Ignite-UX server, select the client for the system to be recovered.
4. Select Install/New Install.
5. Select the recovery configuration to use, and then allow the recovery to continue.
Recovering using the Network for Itanium-Based Clients
To recover a failed disk or volume group using the system recovery image:
1. From the EFI Boot Manager menu, you will see a prompt to select a boot option. Select Boot
Configuration.
EFI Boot Manager ver 1.10 [14.62]
Please select a boot option
HP-UX Primary Boot: 0/1/1/1.2.0
EFI Shell [Built-in]
---------------------------------
Boot Configuration
System Configuration
Use ^ and v to change option(s). Use Enter to select an option
2. The Main Menu appears and prompts you to choose an operation. Select Add a Boot Option.
EFI Boot Maintenance Manager ver 1.10 [14.62]
Main Menu. Select an Operation
Boot from a File
Add a Boot Option
Delete Boot Option(s)
Change Boot Order
Manage BootNext setting
Set Auto Boot TimeOut
Select Active Console Output Devices
Select Active Console Input Devices
Select Active Standard Error Devices
Cold Reset
Exit
3. Select the appropriate network interface so that this network boot option loads the appropriate
file from the following menu. For example, look for entries identified with a MAC address as
in this example.
EFI Boot Maintenance Manager ver 1.10 [14.61]
Add a Boot Option. Select a Volume
IA64_EFI [Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Si
IA64_EFI [Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part3,Si
IA64_EFI [Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,Si
Removable Media Boot [Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(123456789000)]
Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(987654321000)]
Exit
4. Enter an appropriate boot option name at the message prompt. For this example, the new
boot option is named lan0.
210 Recovery