Ignite-UX Administration Guide for HP-UX 11i (B3921-90079, October 2013)

Figure 22 More Info Dialog Box
For HP-UX 11i v3 and later, the More Info screen displays all the lunpath hardware paths for a
device. (Note that the paths can be long - horizontal scrolling may be needed to see the entire
path.) The Legacy HW Path displayed depends on the lunpath hardware path currently selected
in the selection list window. One legacy hardware path is listed. For a concise list of all the legacy
hardware paths leading to the device, select the All Paths... button (Figure 23 (page 76)).
The Legacy HW Path window and the All Paths... button are not available on systems running
HP-UX 11i v2 and earlier.
Figure 23 All Paths Dialog Box
Accessed from the File System tab of the client installation configuration interface, the Disk Selection
– Add/Remove Disks dialog box displays the lunpath hardware path, the legacy hardware path,
or the physical location. See Figure 21 (page 75) for the display format of physical location
hardware paths.
76 Managing I/O for Installation and Recovery