Ignite-UX Administration Guide for HP-UX 11i (B3921-90080, November 2013)

Set Root Password... button on the System tab, and set the DNS information located via the Network
Services... button on the System tab.
Figure 53 Ignite-UX Client Installation Configuration Tabs
The Show Summary, Save As, Reset Configuration, Go!, Cancel, and Help buttons are available
from all tabs with the same functionality.
Table 8 Functions Available From All Tabs
FunctionalityButton
Displays the new installation HP-UX release, software, basic disk layout, and
hardware inventory for the target client.
Show Summary
Saves the configuration for future use. Not available with the TUI. Load saved
configurations from the Configurations... button on the Basic tab.
Save As
Populates all GUI fields with default settings.Reset Configuration
Starts the installation. You will be asked to confirm before the installation begins.Go!
Quits the session.Cancel
Help is available for all GUI fields. Also initiated with the F1 key.Help
Basic Tab
The Basic tab, shown in Figure 53, is displayed as default. The elements on this tab are explained
in the subsections that follow.
Configurations: List Button
Click the selection list button adjacent to Configurations: and select the configuration you want to
use for this installation. The configuration options presented are stored on the Ignite-UX server in
the /var/opt/ignite/data/INDEX file.
If the selected configuration has no corresponding environments, you will get the message shown
below. Select another configuration for installation. If you booted the client with an HP-UX version
Configuring the Installation 119