Ignite-UX Administration Guide for HP-UX 11i (B3921-90080, November 2013)

Use vi to add _hp_loadfile_use_nfs=”true” to the file:
# cat /tmp/ifs.cfg
# instl_adm defaults:
# NOTE: Manual additions between the line containing "instl_adm defaults
# and "end instl_adm defaults" will not be preserved.
server="10.1.54.230"
netmask[]="255.255.248.0"
route_gateway[0]="10.1.48.1"
route_destination[0]="default"
# end instl_adm defaults.
_hp_loadfile_use_nfs="true"
Now use instl_adm to update the install file system:
# instl_adm -f /tmp/ifs.cfg
2. Set up NFS exports and check custom configuration files.
Because of preexisting Ignite-UX file system layouts, the locations of certain files are
automatically moved when Ignite-UX Version C.7.9 or later is installed . These files are /opt/
ignite/Version, /var/opt/ignite/INDEX, and /var/opt/ignite/config.local.
In addition, certain other customer-created config files might need to be moved or edited.
First, edit /etc/exports or /etc/dfs/dfstab as appropriate for the version of HP-UX
running on the Ignite-UX server.
For Ignite servers running HP-UX 11i v2 or earlier:
# cat /etc/exports
/opt/ignite/data -ro
/var/opt/ignite/config -ro
/var/opt/ignite/data -ro
/var/opt/ignite/clients -anon=2
# exportfs -a
For Ignite servers running HP-UX 11i v3:
# cat /etc/dfs/dfstab
share -F nfs -o ro /opt/ignite/data
share -F nfs -o ro /var/opt/ignite/data
share -F nfs -o anon=2 /var/opt/ignite/clients
# shareall
If there are any customer-created config files that are outside of the directories exported by
NFS, they must be moved under /var/opt/ignite/data.
3. Edit the /var/opt/ignite/INDEX file to refer to /var/opt/ignite/data.
Some customers will need to modify the config.local entry in /var/opt/ignite/data/
INDEX. For example, the INDEX clause
cfg "HP-UX B.11.31 Default" {
description "Example HP-UX 11i v3 (11.31) configuration."
"/opt/ignite/data/Rel_B.11.31/config"
"/opt/ignite/data/Rel_B.11.31/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.31/core_cfg"
"/var/opt/ignite/config.local"
}
would need to be modified to be
cfg "HP-UX B.11.31 Default" {
description "Example HP-UX 11i v3 (11.31) configuration."
"/opt/ignite/data/Rel_B.11.31/config"
"/opt/ignite/data/Rel_B.11.31/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.31/core_cfg"
"/var/opt/ignite/data/config.local"
}
94 Security