HP Intelligent Management Center v5.2 Branch Intelligent Management System User Guide

• DNS Enable : Indicates whether or not the device should access the DNS server through this
connection.
• DNS Server : IP addresses of the DNS servers to be used by this connection. This parameter
can be configured when DNS Enable is enabled. You can specify multiple IP addresses
separated by commas.
• Connection Trigger : Trigger used to establish the IP connection, including On Demand, Always
On, and Manual.
• Max MTU Size : Maximum allowed size of an Ethernet frame from LAN-side devices, in the
range from 1 to 1540 bytes. The default is 512 bytes.
Query WAN IP connections
This function allows you to to query WAN IP connections of a device by different criteria, such as
connection name, connection type, connection status, address type, external IP address, and default
gateway.
1. Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page..
2. Select a device that has operation icons in the last column and then click the device name to
display the device details page.
3. Click WAN IP Connection at the right configuration pane to display the WAN IP connection
list page.
4. Enter a connection name, external IP address, and/or default gateway; select the connection
type, connection status, and/or address type.
5. Click Query. The matched WAN IP connections will be displayed on the WAN IP connection
list page.
6. To query WAN IP connections based on the default query criteria, click Reset.
View WAN IP connection details
This function provides the detailed information of a selected WAN IP connection, including the
connection name, connection type, connection status, address type, external IP address, and default
gateway.
1. Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Select a device that has operation icons in the last column and then click the device name to
display the device details page.
3. Click WAN IP Connection at the right configuration pane to display the WAN IP connection
list page.
4. Click a WAN IP connection name to display the detailed information page of the WAN IP
connection.
Add/Modify WAN IP connections
This function allows you to add or modify a WAN IP connection.
1. Select the Service tab, and click Resource > All CPEs in the BIMS navigation tree to display
the All CPEs list page.
2. Select a device that has operation icons in the last column and then click the device name to
display the device details page.
3. Click WAN IP Connection at the right configuration pane to display the WAN IP connection
list page.
4. Click Add to display the Add WAN IP Connection page, or click the of a connection to
display the Modify WAN IP Connection page.
5. Enter the appropriate parameters.
22 Resource management